Mitech MH100 Pen-Type Leeb Hardness Tester

NDT Equipment Sales


Utilising the Leeb Hardness measuring principle, the MH100 pen-type hardness tester from Mitech can perform tests easily and quickly on various metallic materials. It can show the hardness measuring value immediately and can switch to other scales freely.  


  • Measuring Range: (170-960)HLD, (17-68.5)HRC, (19-651)HB, (80-976)HV, (30-100)HS, (59-85)HRA, (13 -100)HRB.
  • Measuring Direction Support 0~360º.
  • Hardness ScalesHL, HB, HRB, HRC, HRA, HV, HS.
  • DisplayHD dox matrix LCD and LED backlight.
  • Data MemoryMax. 500 groupsrelative to impact device 321).
  • Working Power3.6VIntegrated lithium battery  and re-chargeable circuit).
  • Continuous Working Periodapprox 200 hours without using back-light).
  • Communication InterfaceUSB 1.1 port.

Applicable Materials:

Steel and cast steel, cold work tool steel, stainless steel, grey cast iron, nodular cast iron, cast aluminum alloys, brass (copper-zinc alloys), bronze (copper-aluminum/tin alloys), pure copper and forged steel.

Working Conditions:

  • Operating temperature: -20℃~+60℃.
  • Storage temperature-30℃~+60℃.
  • Relative humidity: ≤90%.

The surrounding environment should be free of vibration, strong magnetic fields, corrosive mediums and heavy dust.

Standard Configuration:

  • D impact device.
  • Main Unit.
  • Cleaning brush.
  • Small support ring.
  • Standard block.
  • Data processing software with cable.
  • Operating Manual.
  • Warranty Card.
  • ABS instrument case.

Optional Configuration:

  •  C, DL Impact Device.

For further information, please Contact us or email: