AVENGER EZ

Home
All Products
AVENGER EZ

AVENGER EZ

Product Description

AVENGER EZ

The new AvengerEZ, Generation 2 defines a new standard for ease of use, performance, features and portability in a Miniature Hand-held Flaw Detector. The AvengerEZ features Pulse Rep Rates up to 300Hz and a Display Update Rate better than 40Hz. With the introduction of new and industry leading features including SplitView and SplitScan and AutoTrack, the Avenger represents the best features at an affordable cost.

SplitView is Dual Timebase feature allowing the user to view the full range of the area under inspection in one window while at the same time presenting the user with a resizable second window. The second window has a separately adjustable, Range and Delay. The second window can be fixed a a specific place in time or set to automatically track (AutoTrack) an echo over a predefined level. SplitView also provides the ability to resize the top to bottom window proportion. For instance, the top window can be set to 10% of the available active display while the lower window would be 90%. SplitView can be turned off to use the entire screen for a single large waveform display.

SplitScan is a operating mode allowing the user to view the active waveform while performing a Real Time B-Scan, wether timed or encoded. The feature gives the user positive feedback and identification of indications such as corrosion and pitting in real time.

AutoTrack is a feature where the second window has a separately adjustable, Range and Delay. The second window can be fixed a a specific place in time relative to the main upper window or set to Automatically Track (AutoTrack) an echo over a predefined level. While in AutoTrack, the echo being tracked will display in the center of the lower window regardless of the actual place it is in time. This features allows the user to easily view where on the echo waveform the gage is monitoring in a zoomed fashion.

Features -

User Friendly, Cursor Driven, Plain Text Menus
Thickness & Amplitude Gating
EASY Grip Aluminum Sealed Case
7"H x 3.25"W x 1.4"D
Encoded & Scrolling AmpScan & B-Scan
Embedded Probe Library
2 MByte Data Logger
Scrollable "SpreadSheet" View
High Speed Scan Mode
Single Point Calibration
2 Point Calibration
300Hz Rep Rate!!
High Speed LCD Display
Only 3 'AA' Batteries
RS-232 I/O
Optional USB
English / Metric
Backlight

Specifications -

Display: 240 x 320 Graphic (2.3"W x 3.1"H) Backlight - On / Off / Auto with reading Last reading hold
SplitView: (Handheld Industry First) Main Trace Window: 100 - 10% in 10% Incr. Split View Window: 10% - 100% in 10% Incr. as a Function of Main Trace Window Size
SplitScan: (Handheld Industry First) Display A-Trace and B-Scan Simultaneously
AutoTrack: (Handheld Industry First) When in SplitView, Second Window Displays a Zoom View of the Main A-Trace which Tracks The Echo Being Measured
Screen Freeze Mode
Physical: 3.25" Wide X 1.4 Deep X 7" Long. All Aluminum with gasketed end caps
Range: 0.005" - 400" Total incorporating 200" Delay Resolution - 0.0001" •Inch/mm selectable
Velocity Range: 0.0490 to .9999 in/us • fully adjustable
Calibration: Range, Delay, Velocity & Zero
Pulser / Receiver: Up to 300Hz Rep Rate, Unique and Adjustable IP Supression Mode
Display Mode: RF, +HW, -HW, FW
GAIN: 100Db
Probe Select: Single / Dual Element Probe Library Selection
Damping: -8 Damping Levels 22 - 2K Ohms
Alarm: LED Thickness High, Low or High/Low
I/O: RS-232. I/O Download data from logger. Options USB Connectivity
Memory: 2 MegaBYTE data logger. 30+ character alpha numeric identification of files. Store 20,000+ Data Points with Waveforms & B-Scans
Operational Modes: Single/Dual/Angle/Contact/Delay
Gates: Contact - IP-1st, 1st-2nd Permits Through Paint, Delay/Bubbler/Immersion, IP Blocking, IF Blocking, IF-1st, 1st-2nd Echo Blk POS or NEG Gating DAG Optional
B-Scan Features: 'T' Scan - Time encoded 'B' Scan (Scrolling) Encoded B-Scan
Power Requirements: Operates on 3 AA Alkalyne or NiMH Batteries • Charger & Batteries Included
Transducers, cables and accessories are available for almost any application
Plastic Carry Case included
CE Approved, Manufactured in facilities meeting ISO9001 manufacturing processes